Comtest-networks 2870 Multi-Dwelling POTS Splitter Manual de usuario descargar pdf

Model 2870 Multi-Dwelling POTS Splitter Installation Guide

Comtest Networks Inc.

This guide provides the basic information required to install the Comtest Model 2870 Multi-Dwelling POTS

Splitter Shelf in a Multi-Dwelling location.

Installation

The 2870 requires 10¾” x 8” of mounting space. Four wood screws (not supplied) are typically required for

mounting on a wall. Comtest recommends the use of #8 wood screws, the length of which is determined by the

thickness of the wood surface on which the 2870 is installed.

Model 2870 standard configuration with punch downs

Cabling Overview

The 2870 cabling configurations will vary depending on the installation. However, the physical interface to the

Front Panel connectors are standard 50-pin RJ-21 type receptacle connectors. Each 2870 provides 25 POTS

splitters terminated on each 50-pin connector.

LINE Connector

POTS Connector

PIN 1

1 2

Connector Pin Outs As view from the rear of the shelf: • Signals to and from the outside plant enter the 2870 splitter shelf using the RJ-21 connecto

Sin comentarios

Comtest-networks 2870 Multi-Dwelling POTS Splitter Manual de usuario