Comtest-networks MTAS-192 METALLIC TEST ACCESS SYSTEM Manual de usuario descargar pdf (Pagina 19)

CT-IG-MTAS192-2008-v1_8.doc

Comtest Networks

MTAS-192

June 2006 Installation Guide

Chapter 2

Preparing for Installation

2.1 Installation Personnel

Comtest recommends that all installation activities be conducted by certified central

office (CO) installers.

2.2 Site Survey

Comtest recommends that a site survey be conducted in advance by experienced

personnel to determine and assign the following:

• equipment rack location(s)

• shelf position(s) in the rack

• power distribution panel and fusing

• suitable disconnect device for power feed

• connections to OSS and test head.

2.3 Environmental

The MTAS-192 is designed to be installed in a restricted-access location such as a

Central Office environment or remote hardened enclosures. The MTAS-192 is suitable

for mounting on concrete or other non-combustible surface only. The temperature range

for the MTAS-192 is -40 to +60

degrees Celsius.

2.4 Tools and Materials Required

The MTAS-192 is easy to install. The following equipment is required:

• One (1) large Philips-head (star) screwdriver

• One (1) narrow, long blade slot-edge screwdriver

• Tie wraps for forming and securing various cables to equipment and cable racks

• Bolts for securing the MTAS to the equipment rack

• 8-wire CAT5 cable (shielded is recommended) for TAL connections

• 8-wire CAT5 cable (shielded is recommended) for Ethernet and serial

connections

To operate in temperatures above this range please contact Comtest Networks

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 71 72

Sin comentarios

Comtest-networks MTAS-192 METALLIC TEST ACCESS SYSTEM Manual de usuario Pagina 19